1 – 4 Camera Single Location Wireless Kit

$474.00

  • Mid Range distances 100′ – 6500′
  • 40-50MBPS Bandwidth
  • Line of Sight Panel to Panel Required
  • 4K capable

Wireless Kit – Up to 4 Cameras at one location

For converting up to 4 cameras at one location to wireless transmission back to the NVR location

 

This Kit has a pair of Wireless Transceivers, plus an outdoor POE Switch, that are configured for connecting up to 4 cameras to the Wireless Panel (4 cameras is about the practical limit for one panel).

 

This Kit contains:

  • 1 Pair of Enviro Cams Wireless Transceiver Panels (100 feet to 6500 feet as long as it has a clear line of sight) (each panel has it’s own 48V POE Power Supply)
  • 1 – 4 Channel Outdoor POE Switch for connecting up to 4 cameras to a Wireless Panel
  • 7 – 50′ RJ45 Cables (one from each of the 4 cameras to the POE Switch, then 1 from the Switch output port to the LAN side of the POE Power Supply, then the other from the POE port of the Power Supply to the Panel. At the NVR side, if you come from a POE Port on your NVR or Switch, then you only need 1 cable into the yellow connector on the Wireless Panel.  (No need to use the 48V POE Power Supply at the NVR side since the POE Port on your NVR or Switch is providing the power.)