Long Distance – High Power – POE Switches

RuggedCams newly redesigned long distance high power POE Switches give you every advantage: Long Distance, Maximum Watts, and 2 Gigabit performances. They even have a Fiber port that also delivers a Gigabit stream.

 These new POE Switches come in the following models: 4 ports, 8 Port, 16 Port and also 2 Ports.

 These switched have now been optimized to not only carry High Megapixel, High Bandwidth IP Cameras but also to effortlessly accommodate multi-camera Wireless AP equipment as well, with the capability to handle a total of 2 Gigabits of Data.

 These robust un-managed IP switches can automatically detect the correct wattage standard and deliver either 15 watts per output or 30 watts per production, based on what each camera or device needs.

 ON the front of each switch, there is a 2-position (or a 3-position switch on some models), switch with settings for the environment and equipment that you need. The two parameters are:

  •  N- Normal Mode: distance is normal
  • S- SUPM Mode: Long Distance operation (up to 250 meters when using CAT6 or higher cable).

 (Note: some models have a 3rd position on the switch that puts it into VLAN mode, where the ports cannot communicate with each other. The 16 is the only model with a 2-position switch).

 The Gigabit Uplink Port can work with Single-Mode and Multi-Mode Fiber.

 The 16 and the 24 channel units come with rack-mountable ears.

To get more information on these POE switches, contact one of the Sales Engineers toll-free at 866-301-2288 or stop by our website Ruggedcams.com.

Contact Info

Tech Support

Click Here to go the Tech Support web site

Tech Support Link

Call Tech Support
Toll Free 1-866-283-6003