Overview & License Tag Capture System Cameras with WiFi Recorder Access

Outdoor IP System for Documenting Vehicular Traffic Entering/Exiting Subdivisions, Remote Sites, Gated Entries, Lots, and other Non-Manned Sites.

Pre-Built Factory Kits on Pole(s) – We pre-build and wire all cameras and the Outdoor NVR System on a pole or poles. All wires are hidden and protected. These poles are very easy to install as they are designed to be buried in a 3′ deep hole (just add concrete). A Power Junction box is supplied at ground level.

 (NOTE: All pre-built systems come standard built on a 9 foot (5-inch square) white or Dark Bronze pole (6 feet above the ground and 3 feet buried). Strong Poles make these poles. If you need a higher pole, add $39 per foot.)

Triple Lane/Entry or Gate System – Prebuilt on three poles

Main System and two cameras on one pole – then two cameras on a second pole and third pole – (Part# EGSPB-3)

8 Channel RV-5 Outdoor IP System with six cameras (One Overview N-Range Camera, and one TagShot-IP License Plate Capture Camera on the central system pole, and one Overview N-Range Camera, and one TagShot-IP License Plate Capture Camera on two separate poles – all pre-built on three 9 foot, (5-inch square buriable pole) Contact us with the length of cables between the two poles, and if you need standard or buriable cables. Also, contact us if you need any unique configuration.

For more information on the subdivision license tag capture systems, contact one of our Design Engineers toll-free at 866-301-2288 or stop by our website ruggedcams.com.

Contact Info

Tech Support

Click Here to go the Tech Support web site

Tech Support Link

Call Tech Support
Toll Free 1-866-283-6003